FCL-X Fire & Safety
FCL-X Lithium-Ion Battery Fire Protection
Purpose-built for lithium-ion battery fires, from a phone on the kitchen counter to an electric vehicle in thermal runaway. The FCL-X line covers homes and shops, commercial sites, fleets, and fire departments.
Fire Suppression Industries is an authorized distributor of FCL-X™ products.
Electric vehicle fires
EV fires are the reason we carry FCL-X
An EV battery in thermal runaway keeps making its own heat and can reignite hours after the flames are knocked down. Industry figures cited by FCL-X put an EV fire at up to 40,000 gallons of water and four to eight hours on scene. FCL-X goes into the pack with the water and works on the reaction itself.
FCL-X in action: controlled burn of a Kia EV battery fire.
Kia EV9, full thermal runaway
A 77 kWh pack in full thermal runaway, extinguished with FCL-X in a controlled burn.
No reignition
Controlled burns of a Nissan Leaf and a Kia EV9, run with Georgia fire departments, ended with no reignition.
Goes in the tank you already have
FCL-X FD batch-mixes into apparatus tank water and runs through standard pumps and hose lines.
Who it’s for
Fire departments
Mix FD concentrate into tank water for vehicle and battery fires.
FCL-X FDFleet and EV depots
High-capacity wheeled units for charging lines and parking.
50 and 100 LiterDealerships and service bays
Commercial extinguishers where EVs are stored and serviced.
9 LiterIndustrial and battery storage
Pro Max concentrate for tanks and large-scale response.
FCL-X Pro MaxStraight from FCL-X
What is FCL-X?
FCL-X is a water-based, PFAS-free fire-extinguishing agent built for one job: lithium-ion battery fires. It goes into the battery with the water, cools it fast, neutralizes toxic gases, and helps keep it from reigniting.
Watch the video to see how FCL-X works on the toxic gases a battery fire produces. FCL-X products are made in the USA.
See the Product LineWhy it works
Five Ways FCL-X Works on a Battery Fire
A battery in thermal runaway generates its own heat, releases hazardous gases, and can reignite after the flames are out. FCL-X is designed to address each of those risks.
Gets inside the battery
FCL-X soaks into the battery structure and reaches cells in thermal runaway, helping stop the chain reaction before it spreads to the next cell.
Cools fast
As a water-based agent, FCL-X pulls heat out quickly. Lower temperatures slow the reaction, contain the spread, and give responders control.
Neutralizes hydrogen fluoride
Battery fires release toxic gases, including hydrogen fluoride. FCL-X reacts with them to form non-hazardous salts, reducing the danger on scene.
Suppresses hydrogen gas
FCL-X slows the lithium oxidation that feeds the fire and generates flammable hydrogen, limiting gas buildup and the risk of secondary explosions.
Prevents reignition
A battery can reignite minutes or hours after the flames are out. FCL-X leaves a protective barrier that helps keep the battery stable.

Enclosed storage
Indoors, the Gas Is the Danger
In a parking garage, battery room, or warehouse, a lithium-ion fire’s gases have nowhere to go. Toxic hydrogen fluoride builds up where responders have to work, and flammable hydrogen collects until it can ignite.
FCL-X goes after the gases at the source. According to FCL-X, it converts hydrogen fluoride into non-hazardous salts and suppresses the hydrogen that builds toward an explosion.
Protect an Enclosed SiteHydrogen fluoride
Toxic and corrosive. Converted into non-hazardous salts.
Hydrogen gas
Flammable and explosive when it collects. Generation suppressed at the source.
Where it matters most
Parking garages, fleet depots, battery storage rooms, warehouses, and e-bike storage.
FCL-X works alongside, not in place of, the ventilation, gas detection, and explosion protection an enclosed battery site requires.
How it compares
FCL-X vs. the Usual Options
Water, foam, aggregates, and blankets all have a place. Here’s where FCL-X is different on a lithium-ion battery fire.
| FCL-X | Water | Foam | Aggregates | Blankets | |
|---|---|---|---|---|---|
| What it is | Water-based agent made for lithium-ion fires | Plain water | Foam | Vermiculite, granulates | Fire blankets |
| How it works on a battery fire | Cools the pack and works on the chemical reaction inside it | Cools | Forms a barrier on the surface | Smothers and absorbs at the surface | Contains and smothers the item |
| Hydrogen fluoride (HF) | Converts HF into salts, per FCL-X testing | Not designed to neutralize HF | Not designed to neutralize HF | Not designed to neutralize HF | Not designed to neutralize HF |
| How it’s applied | Extinguishers, pumps, tanks, and hose lines | Extinguishers and hose lines | Extinguishers and foam equipment | Poured or shaken by hand | Pulled over the item |
| Cleanup | Low residue, PFAS-free | Large volumes of runoff | Residue; some foams contain PFAS | Material has to be removed | Blanket and item removed together |
See the difference for yourself: the same scooter battery fire, fought with water and with FCL-X.
Watch Water vs. FCL-XVideo library
See FCL-X Work
Latest FCL-X demos
FCL-X’s newest demonstration videos, played back to back.FCL-X in action: Kia EV battery fire
An EV battery pack in thermal runaway, put out with FCL-X.Changing how we respond to vehicle fires
How FCL-X changes the approach to vehicle fires.Victor FD preps for lithium-ion battery fires
News coverage of a fire department adding FCL-X.FCL-X demonstrations
FCL-X on lithium-ion battery fires of different sizes.Certifications and validations
Tested, Recognized, and Documented
Independent labs and standards bodies have put FCL-X through its paces. The reports are here to read in full.
UL Solutions
UL Recognized Component
The FCL-X agent is recognized as a Class A water-based agent fire extinguisher component for the United States and Canada. UL file EX29532.
NTA 8133
Dutch lithium-ion extinguisher standard
FCL-X meets NTA 8133, the Dutch standard for portable extinguishers used on lithium-ion battery fires.
SafeLabs
Independent burn testing
Third-party fire testing of FCL-X by an independent laboratory.
Read the reportEnviroScience
Toxicity testing
LC50 median lethal toxicity testing to assess environmental impact.
Read the reportNC State Wilson College of Textiles
Verified PFAS-free
Total fluorine analysis confirming the formula contains no PFAS “forever chemicals.”
Read the reportFCL-X Fire & Safety
Made in the USA
The FCL-X agent is manufactured in Georgia, and the extinguisher line is made in the USA.
The FCL-X Product Line
From a 20 oz can for the kitchen to wheeled units and fire-department concentrates. Choose a category, or compare the extinguishers side by side below.
Portable
20 oz, 1 Liter, 2 Liter, 3 Liter
Handheld units for devices, tools, e-bikes, vehicles, and marine batteries at home and in shops.
View portable modelsCommercial
2.5 Gallon / 9 Liter
The primary commercial format for technical and industrial sites. Rechargeable after use.
View the 9 LiterWheeled
50 Liter, 100 Liter
High-capacity units for warehouses, charging sites, and large battery volumes.
View wheeled unitsBulk Agent
ReCharge 275, Pro Max, FD
Premixed refill agent and concentrates for service companies, industry, and fire departments.
View bulk productsCompare extinguishers
Figures from FCL-X product spec sheets.
| Model | Typical use | Discharge time | Discharge range | Operating pressure | Weight | Spec sheet |
|---|---|---|---|---|---|---|
| Portable | ||||||
| FCL-X 20 oz | Phones, laptops, tools, e-bikes at home | 31 s | 3.5 ft / 1.1 m | Pressurized can | 1.08 lb / 0.49 kg | On request |
| FCL-X 1 Liter | Tools, laptops, e-mobility devices | 13.5 s | 32 ft / 9.75 m | 195 psi / 13.5 bar | 4 lb / 1.8 kg | |
| FCL-X 2 Liter | Vehicle batteries, ATVs, marine | 20 s | 32 ft / 9.75 m | 195 psi / 13.5 bar | 8 lb / 3.6 kg | |
| FCL-X 3 Liter | Powersports, marine, riding mowers | 24 s | 40 ft / 12.2 m | 195 psi / 13.5 bar | 12 lb / 5.4 kg | |
| Commercial | ||||||
| FCL-X 9 Liter (2.5 gal) | Technical and commercial sites | 48 s | 27 ft / 6.9 m | 100 psi / 7 bar | 28 lb / 12.7 kg | |
| Wheeled | ||||||
| FCL-X 50 Liter | Warehouses, service and charging sites | 60 s | 35 ft / 10.7 m | 203 psi / 14 bar | Contact us | On request |
| FCL-X 100 Liter | Industrial sites, large battery volumes | 75 s | 35 ft / 10.7 m | 203 psi / 14 bar | 115 lb / 52.2 kg | |
FCL-X 20 oz
A compact, single-use extinguisher for small lithium-ion battery fires at home: phones, laptops, power tool packs, e-bikes, and e-scooters. Small enough to keep in the kitchen, under a sink, or next to where devices charge.
- Extinguisher for small fires only
- For home use; not intended for commercial or industrial use or for multi-family dwellings
- PFAS-free
- Net weight 13 oz (368 g)
Portable Extinguishers
The FCL-X handheld line runs from the pocket-size 20 oz unit to the 3 Liter model, sized to the lithium-ion batteries found in homes, shops, fleets, and commercial spaces. Larger models add agent capacity and discharge time for higher-energy batteries or places where several devices are stored or charged together.
The 20 oz, 1 Liter, 2 Liter, and 3 Liter models are single-use extinguishers for small fires.
Request a Quote
FCL-X 2.5 Gallon / 9 Liter Extinguisher
The primary commercial format: a stored-pressure, hose-equipped extinguisher holding 2.5 gallons of water-based FCL-X solution, labeled for industrial use.
- Aim at the origin of the flame or smoke and target the ruptured area of the cell
- Inspect monthly; install, inspect, and maintain per the owner’s manual and NFPA 10
- Protect from freezing
Recharging this unit
After use, the extinguisher is returned to service with an FCL-X recharge kit: one package of FCL-X agent mixed with water in the cylinder. Recharge and pressurize per the owner’s manual and NFPA 10.
Service companies refilling in volume can use FCL-X ReCharge 275, a premixed tote that refills up to 110 of these units.
Order Recharge Kits
Wheeled Extinguishers
The FCL-X 50 Liter and 100 Liter wheeled units carry larger agent capacity for higher-risk commercial and industrial sites: warehouses, service facilities, charging stations, and operations that handle large quantities of lithium-ion batteries.
Request a Quote
FCL-X ReCharge 275
A 275-gallon tote of premixed, ready-to-use FCL-X agent for companies that service and refill FCL-X 2.5 Gallon / 9 Liter extinguishers. No dilution or special equipment is required, and each tote refills up to 110 extinguishers.
Request a Quote
Pro Max and FD Concentrates
FCL-X Pro Max and FCL-X FD are concentrates batch-mixed into water for use in tanks, pumps, and hose lines, with no special mixing equipment. Pro Max is intended for industrial environments and large-scale mitigation; each 5-gallon kit treats up to 500 gallons of water.
FCL-X FD is formulated exclusively for fire departments. It is added to apparatus tank water only: start tank recirculation at max flow, remove the lid, and empty the container into the tank. Each container makes 500 gallons of water-agent. Store between 23°F and 120°F (-5°C to 49°C).
Request a Quote
Downloads
Product spec sheets
Technical and testing
Safety data sheets
FCL-X™ and the FCL-X logo are trademarks of FCL-X Fire & Safety Inc., used with permission. Fire Suppression Industries, LLC is an authorized distributor. Product selection, instructions, and performance claims follow current FCL-X product documentation, including product labels, SDS, and technical sheets.
